Disconnect sensor connector from power control board.
With ohm scale on multimeter, measure resistance terminal to terminal.
Black-Red Wires = 5.3Kohm~6.2Kohm
Red-White Wires = 2.7Kohm~3.1Kohm
Black-White Wires = 2.7Kohm~3.1Kohm
Sensor Cooking Condition:
Oven should be plugged in at least 5 min before sensor cooking.
Room temperature should not exceed 95F
Oven Cabinet and the exterior of the cooking container must be dry.
The microwave will not generate energy for the first 26 seconds of the sensor cooking cycle.
Was this helpful?
0 / 0