Although there are a number of reasons the dryer’s drum won’t tumble, the most common cause is a defective belt, particularly if the motor is running.
When the dryer’s belt is worn or broken it won’t be able to turn the drum. You’ll need to replace the belt to get your dryer working again. Be sure you purchase the correct belt for your model. Then place the belt on the drum where to old belt had been and wind it onto the idler pulley and the motor pulley.
If the belt isn’t broken or worn, check that it’s in place on the drum and is properly fed thru the pulley configuration. The problem may be as simple as the belt being out of place.
Was this helpful?
0 / 0